Turning The Power On; Selecting The Input And Output - Yamaha C-5000 Owner's Manual

Turning the power on

CAUTION
Be sure to lower the volume level to minimum before
turning the power on .
Turn the power on by setting the STANDBY/ON/OFF
(Power) switch on the front panel to STANDBY/ON.
If the unit is in standby mode, you can also turn the
power on using the remote control.
AMP OPEN/CLOSE CD
1 2
BAL
BAL UNBAL
PHONO
1 2
LINE
CD EXT.DIRECT
TUNER BAND
PRESET
SOURCE LAYER
VOLUME
MUTE
NOTICE
Turn on the power to all components in the following
sequence: power amplifier, preamplifier (this unit), other
components (such as a CD player and tuner) .
Reverse this sequence when you turn the power off .
28
AMP
Selecting the input
and output
Select a pair of output jacks using the OUTPUT selector.
Off
Select the audio source using the INPUT selector.
PHONO jacks
(balanced)
PHONO jacks
(unbalanced)
The corresponding indicators will light up.
All jacks
Only BAL jacks
Only LINE 1 jacks
Only LINE 2 jacks