Table of Contents
Advertisement
S
PECIFICATIONS
The specifications apply when the DMM is warmed up for at least 30
minutes and operates in slow rate.
Below are the basic conditions required to operate the DMM within
specifications:
• Calibration: Yearly
• Operating Temperature Specification: 18~28˚C (64.4~82.4˚F)
• Relative Humidity: 80% (Non condensing)
• Accuracy: ± (% of Reading + Digits)
• AC measurements are based on a 50% duty cycle.
• The power supply cable must be grounded to ensure accuracy.
• All specifications are applicable to the main (1
General Specifications
Specification Conditions:
Temperature: 23˚C±5˚C
Humidity: <80%RH, 75%RH for resistance measurement readings greater
than 10MΩ.
Operating Environment: (0~50˚C)
Temperature Range: 0~35˚C, Relative Humidity: <80%RH;
Indoor use only
Altitude: 2000 meters
Pollution degree 2
Storage Conditions (-10~70˚C)
Temperature Range: 0~35˚C, Relative Humidity: <90%RH;
General:
Power Consumption: Max 15VA
Dimensions: 265 mm (W) X 107 mm (H) X 302 mm (D)
Weight: Approximately 2.9 kg
>35˚C, Relative Humidity: <70%RH
>35˚C, Relative Humidity: <80%RH
st
) display only.
Advertisement
Table of Contents
