Barcode Reading/Decoding Specifications; Conditions - Opticon PX-36 Specification Manual

7.4 Barcode reading/decoding specifications

7.4.1 Conditions

When the aiming patter is positioned over the centre of a barcode label, the scanner is able to read it.
The conditions for the following specifications are as follows unless otherwise specified in each
section.
Temperature and humidity
Ambient light
Angles
Curvature
PCS (1D and 2D)
Scanning Test
Bar code test sample
(1D and 2D)
<Bar code labels used>
1D codes:
2D codes (incl. GS1 Databar, and stacked codes):
Room temperature, room humidity
100 ~ 200 lx
Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0°
R = ∞
0.9 or higher
1 read in 0.5 sec or less. Accept the performance with 70% or more
success rate for 10 readings.
Refer to section 7.4.2 for details.
Opticon test sheet
Labels printed by a dedicated barcode printer
PX-36
V-1.0
15