Table of Contents
Advertisement
7.2 Aiming Pattern
The aiming pattern is used for the following purposes:
1. Light source to indicate the appropriate reading range.
2. Light source for auto trigger operation.
The specifications for the aiming pattern are as follows:
・
The optical axis of the field of view and the center of the aiming pattern coincide at a distance of
L=65±20 mm from the front edge of the scanner.
・
The width of the aiming pattern is 80%±10% of the width of the field of view at a distance of
L=65mm.
7.3 Imaging Range
L: Distance from the front edge of scanner
H: Horizontal imaging range
V: Vertical imaging range
All values have an accuracy of ±5%.
Figure 4: Aiming pattern
[mm]
40
60
[mm]
66
82
[mm]
42
52
PX-36
V-1.0
80
100
120
140
97
111
125
136
62
72
82
93
14
Advertisement
Table of Contents
