Page 1
RS-3000 Sub miniature, High-Performance, 2D data collector Specifications Manual Spec manual RS-3000 Sub Miniature 2D data collector Revision 1 Copyright (C) 2021 Opticon Sensors Europe B.V. All rights reserved.
Page 2
Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer.
Page 3
RS-3000 Specifications Manual Revision History This document is a compilation of all individual specification manuals for the MDI-4000 Series of scan engines. Product Name: RS-3000 Specifications Manual Edition Date Page Section Description of Changes First September 16, 2019 Initial release.
Of course, it is also possible to charge it via the USB-C port. • NFC Tag for Bluetooth pairing: The RS-3000 has a build-in tag that can be used my most modern smart phones for easy Bluetooth pairing.
RS-3000 Specifications Manual 3 Physical Features 3.1 Dimensions 3.1.1 RS-3000 Dimensions 32.3 x 47.8 x 20.4 mm (WxLxH) Figure 1: Dimensions of the RS-3000...
-20 to 60 °C Storage Temperature: -40 to 70 °C Note: Temperature during charging should be between 0 and 45 °C. To protect the battery the RS-3000 will automatically stop the charging process when the temperature is outside these values. 4.2 Humidity...
The RS-3000 is guaranteed to withstand the conditions of the following drop test. Drop test: Drop the RS-3000 10 times in total, at top, bottom, front, back, left, right, top-left, top-right, bottom-left and bottom-right faces, from a height of 1.5 meters onto a concrete floor.
RS-3000 Specifications Manual 8 Serial Label Figure 3: Serial label Label dimension: 17.5mm x 19.5mm Tolerance ± 0.1mm Label material: Consist of base + laminate protection against wear. 80μ yupo label, backing with glue Base: 25μ clear lamination Laminate: RoHS complaint Bar code area: Standard Code 39 + human readable text (printed below the bar code).
RS-3000 Specifications Manual 9 Regulatory Compliance 9.1 LED Safety IEC 62471:2006 Exempt Risk Group 9.2 Product Safety EN 62368-1:2014 +A11:2017 IEC 62368-1:2014 9.3 EMC and RED EN 300 328 V2.1.1 EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 62479:2010...
RS-3000 Specifications Manual FCC Part 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Before you start using the product, fully charge the battery. • The battery used in the RS-3000 may slightly expand as performance degrades. Even if the product is not in use, battery performance may deteriorate after two years from the battery manufacture date.
RS-3000 Specifications Manual 10.3 Bluetooth • This product supports Bluetooth wireless communication with other Bluetooth devices that have the same profile. • This product complies with Bluetooth standards; however, its communication performance with untested devices is not guaranteed. • Bluetooth devices use the 2.4 GHz frequency band that is shared among other devices.