Regulatory Compliance; Led Safety; Product Safety; Emc - Opticon PX-36 Specification Manual

9

Regulatory Compliance

9.1

LED Safety

IEC 62471:2006 Exempt Group

9.2 Product Safety

EN60950-1:2006
IEC60950-1:2005

9.3 EMC

R&TTE Directive
・EN 55022:2010
・EN 301 489-1 V1.9.2
・EN 301 489-17 V2.1.1
・EN 300 328 V1.9.1
FCC Part 15 Subpart B Class B
Federal Communications Commission Notices
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Harmful Interference Notice
This product has been tested and complies with the specifications for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used according to the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which is found by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment or devices
• Connect the equipment to an outlet other than the receiver's
• Consult a dealer or an experienced radio/TV technician for assistance
Changes or modifications to this equipment that have not been approved by Ruckus Wireless may
void the user's authority to operate this equipment.
RF Exposure Information
This product complies with FCC RF radiation exposure limits set forth an uncontrolled environment.
PX-36
V-1.0
23