Amprobe 560IR710 User Manual page 9

X�
Warning: Read Before Using
• Do not stare into laser beam.
• Do not point laser directly at eye or indirectly off
reflective surfaces.
• For use by competent persons only.
• Do not point laser directly at eye or indirectly off
reflective surfaces.
• Replace the batteries as soon as the low-battery
indicator appears.
• Verify the Tester's operation by measuring on a
known voltage source. Do not use the thermometer
if it operates abnormally.
• Do not operate the thermometer around explosive
gas, vapor, or dust.
• To avoid a burn hazard or fire, know that reflective
objects may be much hotter than the indicated
temperature reading.
• Do not leave the thermometer on or near objects of
high temperature.
• If the thermometer is used in a manner not specified
by this manual, the protection provided by the
thermometer may be impaired or may result in
hazardous laser radiation exposure.
�
Cautions
To avoid damaging the thermometer under
measurement, protect them from the following:
• Do not stare into laser beam.
• EMF (electro-magnetic fields) from arc welders,
induction heaters
• Static electricity
• Thermal shock (caused by large or abrupt ambient
temperature changes — allow 30 minutes for
instrument to stabilize before use)
• Do not leave the thermometer on or near objects of
high temperature
2