Using An Alternate Mount Or Stand - Wacom DTI-520 User Manual

DTI-520 Component Functions

Using an Alternate Mount or Stand

If you will be using DTI-520 in an installation that requires the use of an alternate
mounting platform, you can remove the adjustable stand from DTI-520 and mount the
pen display onto a VESA conforming mount arm or stand.
A VESA mounting platform will require mount screws that are 4 mm wide with a 0.7
mm pitch (M4 Regular), and a maximum screw clearance depth of 15 mm. Exceeding
the screw clearance depth of 15 mm will damage DTI-520 internal components.
To remove the adjustable stand and attach DTI-520 to a different mounting platform:
1.
Turn off your computer
and power off DTI-520.
Then disconnect all cables
from DTI-520.
2.
Protect the display screen sur-
face by spreading a soft cloth
onto a flat table and placing
DTI-520 face down on the
cloth.
3.
Remove the four screws
and lift the adjustable stand
assembly away from the body
of DTI-520.
4.
Using the appropriate screws
for your mounting platform,
firmly attach DTI-520 to the
alternate mounting platform.
5.
Rettach the cabling.
CAUTION
When attaching DTI-520 onto
an alternate mounting platform,
be sure to follow all instructions
in the documentation supplied
by the platform manufacturer.
If improperly installed, the unit
could fall and be damaged.
18
unscrew