modway EEI-3195 Manual page 3

EEI –3195 Office Chair
STEP 3:
Attach Left Arm (6) and Right Arm (7) to the bottom of Seat (4) by using 6 pieces of Bolts (A) with 6 pieces of
Flat Washers (C) as shown.
Tighten Bolts (A) by using Allen Wrench (F) as shown.
STEP 4:
Attach Control Mechanism (3) to the Seat (4) by using 4 pieces of Bolts (B) and 4 pieces of Flat Washers (C)
as shown. Tighten Bolts (B) by using Allen Wrench (F) as shown.
Note: the four Bolts (B)
convenient assembly of
Customer Service 908-368-1025︱www.modwayfurniture.com
in this step cannot be locked tightly. Fix them with the
Back Frame (5).
B
3
7
FRONT
F
C
FRONT
6
4
Hardware & Tools required
Bolts (B) first, leaving room for
F
B
C
x 4
Page 3 of 4
x 1
x 4