3.3 Wiring Precautions
Check the following when installing and wiring the I/O module:
Duct for low-
voltage singnals
(1) Place the I/O module with the light electric system I/O on the left side and heavy
electric system I/O on the right side and separate the wiring.
(2) Separate each unit by at least 100 mm for maintenance and ventilation.
(3) Separate at least 200 mm from power line and power equipment or provide a
shielding plate. (Ground the shielding plate.)
6F8C0869
Base unit
I
C
Power I/O
Low-voltage
F
P
I/O modules
U
Expansion unit
Low-voltage
Power I/O
I
I/O modules
F
Low-voltage I/O
DC input module
Analog input module
Analog output module
Resistance thermometer bulb input module
Pulse input module
Positioning module
ASCII module
Transmission module
modules
100mm min.
200mm min.
modules
Duct for power
singnals
AC input module
DC output module
AC output module
Contact output module
3.3 Wiring Precautions
3
Power
line
Power I/O
73