Sokkia SDL30 Operator's Manual page 15

• When the fractional/decimal display format is set to "0.001m" and
the unit of measurement is "m", the display is as follows:
• When the fractional/decimal display format is set to "0.001ft" and
the unit of measurement is "ft", data is displayed as follows:
When measuring mode is "Single", "Average" or "Repeat"
Height:
Distance: Up to 1 decimal
When measuring mode is "Tracking"
Height:
Distance: 0 decimal
• When the fractional/decimal display format is set to "0.01ft" and the
unit of measurement is "ft", data is displayed as follows:
When measuring mode is "Single", "Average" or "Repeat"
Height:
Distance: Up to 1 decimal
When measuring mode is "Tracking"
Height:
Distance: 0 decimal
• When the fractional/decimal display format is set to "1/8" and the
unit of measurement is "inch", the display is as follows:
14
When measuring mode is "Single",
"Average" or "Repeat"
Height:
Distance: Up to 2 decimals
When measuring mode is "Tracking"
Height:
Distance: Up to 1 decimal
Up to 3 decimals
Up to 2 decimals
Up to 2 decimals
Up to 1 decimal
When measuring mode is "Single",
"Average" or "Repeat"
Height: **-**-*/
Distance: **-**
When measuring mode is "Tracking"
Height: **-**-*/
Distance: **
Up to 3 decimals
Up to 2 decimals
*
*