Using A Microphone Or Audio Source Connected To An Xlr Terminal - Canon XA10 User Manual

Using a Microphone or Audio Source Connected to an XLR Terminal

When a microphone or audio source is connected to an XLR terminal and the audio input switch is set
to EXT, the audio level indicator will appear on the screen.
Turn the corresponding audio level dial to adjust the audio
recording level as necessary.
• As a guideline, adjust the audio recording level so that the
audio level meter will go to the right of the -18 dB mark (about
one mark right of the -20 dB mark) only occasionally.
NOTES
• When the audio level meter reaches the red point (0 dB), the sound may be distorted.
• If the audio level is too high and the sound gets distorted while using an external microphone
connected to an XLR terminal, activate the microphone attenuator with the ATT switches. For a
microphone connected to the MIC terminal, adjust the audio recording level manually.
• We recommend using headphones to check the sound level while adjusting the audio recording
level or when the microphone attenuator is activated.
Audio Recording Level
77