Exposure Adjustment; Using The Manual Exposure Recording Program - Canon XA10 User Manual

Exposure Adjustment

Exposure Adjustment
At times, backlit subjects may appear too dark (underexposed) or subjects under very strong lights
may appear too bright or glaring (overexposed). In such cases, adjusting the exposure will correct this.
This camcorder features a dedicated recording program, [y Manual Exposure], for adjusting the
exposure manually. However, you can also adjust the exposure when using other recording programs.
64

Using the Manual Exposure Recording Program

Using the [y Manual Exposure] recording program, you can adjust the aperture, shutter speed and
gain to achieve the desired exposure.
Operating modes:
1 Activate the [y Manual Exposure] recording program.
[FUNC.] [Rec. Programs]
2 Touch the control button of the setting you wish to adjust.
Shutter speed
3 Touch [y] or [A] to set the desired value.
• You can also drag your finger along the dial.
• The exposure will change according to the setting's new value. Repeat steps 2 and 3 to adjust
other settings.
• Before touching [a], you can also use the zebra pattern (see below) and waveform monitor
(0 84).
4 Touch [a].
NOTES
• When adjusting the exposure, you can also use the waveform monitor (0 84).
• If you set 6
aperture, shutter speed and gain with the CUSTOM dial.
[y Manual Exposure]
Aperture
Gain
[Custom Key/Dial] to [
Adjustment dial
Manual Exposure] (0 90), you can adjust the