Audio Mix - Canon XA10 User Manual

Audio Mix

Audio Mix
When recording, you can mix audio from the built-in microphone with external audio from the MIC
terminal and adjust the mix balance for original sound effects. The external audio input can be from the
optional WM-V1 Wireless Microphone, a commercially available external microphone or from an
external audio player (analog Line In).
Operating modes:
80
1 Connect the external source to the MIC terminal.
2 Open the [MIC Terminal Input] screen.
[FUNC.] [MENU]
3 Touch [ External Audio] or [
• This step is not necessary after connecting an optional WM-V1 wireless microphone.
4 Activate the audio mix.
[Audio Mix]
5 Adjust the audio mix balance as necessary.
• Touch [INT] (more of the sound from the built-in microphone) or [EXT] (more of the sound from the
external audio) or drag your finger along the audio mix bar to adjust the mix balance as desired.
6 Touch [a] to set the audio mix and close the menu.
7
[MIC Terminal Input]
[A On]
Microphone] and then touch [f].