Table of Contents
Advertisement
Reading Parameters
Stand Mode Flash
Enables/disables the LED flash when the reader is in Stand Mode.
DEFAULT
$CSMFL01
Stand Mode Flash = Enable
Flash On Time
This feature specifies the ON time for the indicator LED while in Flash Mode.
The selectable range is 100 to 9,900 milliseconds (0.1 to 9.9 seconds), in 100
millisecond increments. See
programming instructions.
$CSNFN
Select Flash ON Time Setting
Make a mistake? Scan the CANCEL bar code to abort and
not save the entry string. You can then start again at the
beginning.
Product Reference Guide
OA = Flash is ON for 1 Second
DEFAULT
Stand Mode Flash = Disable
"Flash On Time"
on page 303 for more detailed
Enter/Exit Programming Mode
$CSMFL00
~
CANCEL
87
- Quick Links:
- Table of Contents
- Setup
- Programming
Hide quick links:
Advertisement
Table of Contents
