Datalogic QuickScan I QD21 1 Series Product Reference Manual page 280

BT Pin Code
After enabling Security Mode (see
whether you want to set a 4-digit or a 16-digit PIN Code. See
detailed information and examples for setting this feature.
Select PIN Code Length
DEFAULT
Select 16-character BT PIN Code
Set PIN Code
Determine the desired characters for the PIN code, then convert to hexadecimal
using the ASCII Chart on the inside back cover of this manual. See
detailed information and examples for setting this feature.
Set 4-character BT Pin Code
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the desired bar
code , followed by the digits from the Alphanumeric char-
Appendix D. Keypad representing your
acters in
desired character(s). End by scanning the ENTER/EXIT
bar code again.
CANCEL
DEFAULT
270
"BT Security Mode" on page
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
31323334 = Default PIN Code is 1234
Enter/Exit Programming Mode
Select 4-character BT PIN Code
Set 16-character BT PIN Code
QuickScan™ I QD21X1 / QM21X1 / QBT21X1
269), specify
page 310 for
page 310 for