Datalogic QuickScan I QD21 1 Series Product Reference Manual page 285

The features in this section are valid only for the QuickScan QM21XX Star
model:
• STAR Radio Protocol Timeout on page 275
• STAR Radio Transmit Mode on page 276
STAR Radio Protocol Timeout
This parameter sets the valid wait time before transmission between the hand-
held reader and Base Station is considered failed.
When setting this parameter, take into consideration the radio traffic (number
of readers in the same area). The selectable range for this feature is from 02 to
25 seconds. See
ples for setting this feature.
Set Radio Protocol Timeout
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
DEFAULT
Product Reference Guide
Features for Star Models Only
page 309 in "References" for detailed information and exam-
02 = 2 Seconds Radio Protocol Timeout
CANCEL
275