Step 11
You will need
6 x Cam Bolts
Phillips Head
(H3)
Screwdriver
Attach 6 x Cam Bolts (H3) into Top Panel (P1) as shown by tightening with the
Phillips Head Screwdriver.
Step 12
You will need
8 x Dowels
6 x Cam Nuts
(H1)
(H4)
Phillips Head
Screwdriver
Insert 8 x Dowels (H1) into the holes of Side Panels (P2,P3), Divider (P4) and Rail (P9).
Insert 6 x Cam Nuts (H4) into the holes of Side Panels (P2,P3) and Divider (P4).
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
Attach Top Panel (P1) and tighten the cam nuts.
fantasticfurniture.com.au
H3
H3
H3
H1
H4
H1
(P2)
H3
H3
H3
(P1)
(P1)
H1
H4
H4
H1
(P4)
(P3)
Page 9