fantastic furniture Como Tallboy 6 Drw Manual page 6

Step 4
You will need
3 x Small 1 x CL Runner
Screws (H5) Track (H6)
Phillips Head
Screwdriver
Attach 1 x CL Runner Track (H6) to Divider (P4) with 3 x Small Screws (H5) by
tightening with the Phillips Head Screwdriver.
Step 5
You will need
3 x Small 1 x CR Runner
Screws (H5)
Track (H7)
Phillips Head
Screwdriver
Turn Divider (P4) over to the other side,then attach 1 x CR Runner Track (H7)
with 3 x Small Screws (H5) by tightening with the Phillips Head Screwdriver.
Step 6
You will need
1 x Long
1 x Cam Bolts
Screws (H2)
(H3)
Phillips Head
1 x Cam Nuts
Screwdriver
(H4)
Attach 1 x Cam Bolt (H3) into Rail (P6). Insert 1 x Cam Nut (H4) into the hole of Divider (P4).
Rotate the cam nut so the arrow point towards the incoming cam bolt.
Push Divider (P4) into place and tighten the cam nut.
Attach Rail (P9) to Divider (P4) with 1 x Long Screw (H2).
fantasticfurniture.com.au fantasticfurniture.com.au
H5
H5
H2
(P9)
(P4)
H3
H4
(P6)
H5
H5
H6
(P4)
H5
H5
H7
(P4)
This is how a cam nut works........
H5
CL
H6
H5
CR
H7
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Page 6