Responsibilities; Hazards Of Use; General - Leica T-Scan 5 User Manual

1.4

Responsibilities

Manufacturer of Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as Leica
the product Geosystems, is responsible for supplying the product, including the user man-
ual and original accessories, in a safe condition.
Person responsible
The person responsible for the product has the following duties:
for the product
•
•
•
•
•
1.5

Hazards of Use

1.5.1

General

Unqualified installation on automatic machines and robots
This action may result in personal or material damage.
▶
Dropping, misusing, modifying, storing the product for long periods or
transporting the product
Watch out for erroneous measurement results.
Precautions:
▶
Safety Directions
All manuals and user guides at all-guides.com
To understand the safety instructions on the product and the instruc-
tions in the user manual.
To ensure that it is used in accordance with the instructions.
To be familiar with local regulations relating to safety and accident pre-
vention.
To inform Leica Geosystems immediately if the product and the applica-
tion becomes unsafe.
To ensure that the national laws, regulations and conditions for the
operation of the product are respected.
WARNING
This product may be installed on automatic machines and robots only
by an appropriately trained and qualified specialist.
CAUTION
Periodically carry out test measurements and perform the field adjust-
ments indicated in the User Manual, particularly after the product has
been subjected to abnormal use as well as before and after important
measurements.
7