1.2
Intended use
Reasonably foreseea-
ble misuse
1.3
Environment
1.4
Manufacturer of the
product
Person responsible
for the product
6
Definition of Use
Measuring horizontal and vertical angles.
•
Measuring distances.
•
•
Capturing and recording images.
Recording measurements.
•
Remote control of product.
•
•
Data communication with external appliances.
•
Use of the product without instruction.
Use outside of the intended use and limits.
•
Disabling safety systems.
•
•
Removal of hazard notices.
Opening the product using tools, for example screwdriver, unless this is
•
permitted for certain functions.
Modification or conversion of the product.
•
Use after misappropriation.
•
•
Use of products with recognizable damages or defects.
Use with accessories from other manufacturers without the prior explicit
•
approval of Leica Geosystems.
•
Inadequate safeguards at the working site.
Deliberate dazzling of third parties.
•
Limits of Use
Suitable for use in an atmosphere appropriate for permanent human habita-
tion: not suitable for use in aggressive or explosive environments.
DANGER
Working in hazardous areas, or close to electrical installations or simi-
lar situations.
Life Risk.
Precautions:
▶
Local safety authorities and safety experts must be contacted by the per-
son responsible for the product before working in such conditions.
Responsibilities
Leica Geosystems AG, CH-9435 Heerbrugg, hereinafter referred to as
Leica Geosystems, is responsible for supplying the product, including the user
manual and original accessories, in a safe condition.
The person responsible for the product has the following duties:
To understand the safety instructions on the product and the instructions
•
in the user manual.
To ensure that it is used in accordance with the instructions.
•
•
To be familiar with local regulations relating to safety and accident preven-
tion.
To inform Leica Geosystems immediately if the product and the application
•
becomes unsafe.
To ensure that the national laws, regulations and conditions for the opera-
•
tion of the product are respected.
Safety Directions