Supero SUPERSERVER 2027TR-H72RF User Manual page 98

SUPERSERVER 2027TR-H72RF/H72QRF/H72FRF USER'S MANUAL
Installing Add-On Cards (Figure 6-15)
1. Disconnect the chassis from any power source, lay the chassis on a fl at
surface, and open the chassis cover.
2. Pull out the motherboard node drawer from the chassis.
3. Pull open the expansion card PCI slot clip in the rear of the motherboard
node drawer.
4. Remove the PCI slot shield.
5. Place the expansion card into the motherboard node drawer.
6. Slide the expansion card into the rear riser card PCI slot and fi t the expansion
card bracket with the opening in the rear of the motherboard node drawer.
7. Close the expansion card PCI slot clip.
8. Close the cover, reconnect the power supply and power-up the chassis.
PCI Slot
Shield
Figure 6-15: Installing the Expansion Card
Add-On Card
Riser Card
Screw
Bracket
Riser Card
6-16