Supero SUPERSERVER 2027TR-H72RF User Manual page 3

About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer 2027TR-
H72RF/H72QRF/H72FRF. Installation and maintainance should be performed by
experienced technicians only.
The SuperServer 2027TR-H72RF/H72QRF/H72FRF is a high-end server based
on the SC217HQ-R1620B 2U rackmount chassis and the X9DRT-HF/HIBQF/
HIBFF dual processor serverboards. All models have an IPMI LAN port and two
serverboard nodes, each with six hot-swap Hard Disk Drives (HDD) each per node.
Each of the various models of the SuperServer 2027TR-H72RF/H72QRF/H72FRF
servers and their associated serverboards for each of their unique options are listed
in the table below:
SUPERSERVER 2027TR-H72RF/H72QRF/H72FRF Model Variations
Server
Model
2027TR-H72QRF
2027TR-H72FRF
2027TR-H72RF
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X9DRT-HF/HIBQF/HIBFF
serverboard and the SC217HQ-R1620B chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer 2027TR-
H72RF/H72QRF/H72FRF into a rack and check out the server confi guration prior to
powering up the system. If your server was ordered without processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Preface
X9DRT
Serverboard
X9DRT-HIBQF
X9DRT-HIBFF
X9DRT-HF
iii
Infi niBand
QDR
YES
Preface
Infi niBand
FDR
YES