Zephyr AK7048BS Use, Care And Installation Manual page 15

This range hood is equipped standard with a single blower vertical duct option. To convert from single blower
vertical ducting to dual blower vertical ducting please following the instructions below.
PBD-1200A dual blower kit compatible only with AK7036BS, AK7042BS and AK7048BS models.
1. Disconnect blower plug.
attaching single blower plate. Remove single
blower plate from hood body.
5. Install previously removed blower onto one side
removed screws from step 2.
blower to single blower plate. Remove blower
from hood body.
removed from step 3.
screws.
13