Zephyr AK7000 Use, Care And Installation Manual

USE, CARE, AND INSTALLATION GUIDE
Read all Instructions before Installing and operating this appliance
MODELS: AK7000, AK7036, AK7042 Tempest I
IMPORTANT SAFETY NOTICE
WARNING
Installation
The installation in this manual is intended for qualified installers, service technicians or persons
with similar qualified background. DO NOT attempt to install this appliance yourself. Injury could
result from installing the unit due to lack of appropriate electrical and technical background.
All electrical wiring must be properly installed, insulated and grounded. Overly accumulated
grease in old duct work should be cleaned out or duct work should be replaced if necessary to
avoid the possibility of a grease fire. Check all joints on duct work to insure proper connection
and all joints should be properly taped.
Operations
Read all instructions in this manual before operating the appliance. Save these instructions for
future reference.
Always leave safety grills and filters in place. Without these components, operating blowers
could catch on to hair, fingers and loose clothing.
NEVER dispose cigarette ashes, ignitable substances, or any foreign objects into blowers.
NEVER leave cooking unattended. When frying, oil in the pan can easily overheat and catch fire.
The risk of self combustion is higher when the oil has been used several times.
Cleaning
The saturation of greasy residue in the blower and filters may cause increased inflammability.
Keep unit clean and free of grease and residue build-up at all times to prevent possible fires.
Filters must be cleaned periodically and free from accumulation of cooking residue (see clean-
ing instructions inside). Old and worn filters must be replaced immediately. Do not operateblow-
ers when filters are removed. Never disassemble parts to clean without proper instructions.
Disassembly is recommended to be performed by qualified personnel only. Call our service cen-
ter for removal instructions.
The manufacturer declines all responsibility in the event of failure to observe the instruc-
tions given here for installation, maintenance and suitable use of the product. The manufac-
turer further declines all responsibility for injury due to negligence and the warranty of the
unit automatically expires due to improper maintenance.
* Please check for latest specification revisions before any custom work or cutouts.

LIST OF MATERIALS

1 - Hood
2 - Baffle filters (3-36", 3-42")
2 - Halogen light bulbs (pre installed)
1 - Hardware packet containing:
4 - 2" drywall screws
4 - 1 1/2" drywall screws
4 - 1" drywall screws
4 - 1/2" washers
3 - wire connectors
1 - 6 to 3 1/4 x 10 rectangular transicion adapter