Shoprider Torino S-778XLSBN User Manual page 7

Continued.....
Armrest Width Adjustment
The armrest width can be adjusted by
loosening the two handknobs at the rear
base of the seat, moving the armrest to the
required width and
handknobs.
DO NOT use the scooters with the armrest
removed. The armrests should not be used
for full support when transferring from the
scooter. Swivel
assistance whenever necessary.
Armrest Angle Adjustment
The angle of the armpad can be adjusted by
tightening or loosening the screw under the
armpad. Tightening will raise the angle and
loosening will reduce the angle.
Dis-assembly
The Torino scooter can be 'broken down' into five components for
transportation – Front Chassis, Rear Chassis, Seat and Batteries (x2).
Care should be taken when dis-assembling the scooter. Components can be
heavy so assistance should be sought when lifting.
Remove the seat and rear chassis
cover as previously described.
Undo the battery connections and
the large orange main loom plug.
Undo the Velcro straps and remove
the batteries.
Disconnect the rear brake cable
from the rear brake hub.
Locate and remove the locking pin,
which is situated as shown in the
image opposite.
re-tightening
the seat and
6
the
seek
Adjustment
Screw
Handknobs