Canon OPTURA200 MC Instruction Manual page 97

Turning the Analog-Digital Converter On
+ PLAY
TAPE
(VCR)
VCR SET UP
( 40)
To turn the analog-digital converter on, open the menu and
select VCR SET UP. Then select AV \ DV OUT, set it to ON and
close the menu.
OR
Press the AV \ DV button on the wireless controller.
Caution:
• For normal use, set AV \ DV OUT to OFF (so that AV \ DV does not
appear in the display). If it is set to ON, you cannot input digital signals
through the camcorder's DV terminal.
• When connecting to a PC equipped with a DV terminal, you may not be
able to transfer converted signals to your PC, depending on the software
you are using, and the specifications of your PC and its settings.
AV DV OUT•••OFF
E
97