Dubbing To/From A Tape With Digital Video Equipment - Canon OPTURA200 MC Instruction Manual

Dubbing to/from a Tape with Digital Video Equipment

Digital video equipment fitted with the DV terminal lets you edit, copy and
transfer data digitally, with virtually no generation loss in image and sound
E
quality. The DV terminal is for both line-in and line-out, since a single DV
cable can handle data in both directions.
• If a digital VCR is connected and an anomalous signal is sent from the VCR,
the images recorded on the tape may also be anomalous (although it may
not appear so on the TV image), or not recorded at all.
• You are unable to dub tapes recorded with the copyright protective signal.
MIX/
SLIDE SHOW
Side with
arrow
Preparations
Example dubbing to the camcorder
1. Connect the camcorder and the other digital device.
• Connect the Canon CV-150F DV cable (optional) with the sides of the
plugs marked with the arrows facing as shown above.
2. Prepare the other device.
• Turn on the power and load a recorded cassette.
3. Turn the camcorder's POWER switch to PLAY (VCR), and move
the camcorder's TAPE/CARD switch to TAPE.
• DV IN appears in the display.
4. Load a blank cassette.
92
INDEX
SCREEN
CARD
REC SEARCH
: Signal flow
REC
FF
REW PLAY
PAUSE
ZERO SET
– / STOP + /
MEMORY
/ /
PAUSE SLOW
AUDIO DUB.
× 2