Canon OPTURA200 MC Instruction Manual page 108

Important
E
• Inserting or removing the memory card without first setting the POWER
switch to OFF can result in data damage.
• This camcorder uses only SD Memory Cards (
MultiMediaCards. You cannot use any other types of memory cards.
* logo is a trademark.
Inserting and Removing the Memory Card
1. Turn the POWER switch to OFF.
• When removing the memory card, make sure the card access indicator is
off.
2. Open the memory card compartment cover in the direction
of the arrow.
3. Insert or remove the memory card.
• Push the memory card all the way in.
• Remove the memory card by pushing the card in and letting it spring
out.
Do not attempt to pull the memory card out without first pushing it in.
4. Close the cover.
• When inserting the memory card, do not attempt to close the cover
forcefully without the memory card properly inserted.
Notes:
• When you set the camcorder to CARD PLAY (VCR) mode, the last image
recorded appears. If there are no images recorded on the memory card,
NO IMAGES appears in the display.
• Do not touch the memory card terminals.
108
*) or
Card access indicator