Canon OPTURA200 MC Instruction Manual page 177

Time Code
0:12:34:12
This records counter information, including hour,
E
minute, second, and frame number on a special
data code area on the tape itself. It is reset
automatically when a new tape is loaded. In TAPE
CAMERA mode, the frame number doesn't appear
in the display.
Recording reminder
0s e c
When you start recording, the camcorder counts
from 0SEC to 10SEC. Shots which are shorter than
ten seconds may be difficult to edit later. On the
other hand, if you are not planning to edit the
10s e c
recording, remember that a shot which does not
contain action should generally last no longer than
10 seconds.
" AUTO POWER OFF"
The camcorder will turn itself off if you leave it in
AUTO POWER OFF record pause mode for more than about 5 minutes.
AUTO POWER OFF
This display appears 20 seconds (approx.) before
the camcorder turns off.
177