Canon OPTURA200 MC Instruction Manual page 69

Digital effects can be set with the controls on the body of the camcorder or
the wireless controller.
Operating Faders
Sound and image fade together.
When operating faders in TAPE CAMERA mode, make sure the program
selector is set to Q.
,
+
TAPE CAMERA
Select fader
1. Press the DIGITAL EFFECTS button to open the digital effects
menu.
• D.EFFECT
2. Select FADER.
• The settings appear.
3. Select the desired setting.
• You return to the digital effects menu.
4. Press the DIGITAL EFFECTS button to close the menu.
• The name of your selected fader flashes in the display.
Fader on/off
5. Press the ON/OFF button.
• The name of your selection stops flashing.
• Each time you press the ON/OFF button, the chosen fader is activated
(display lights continuously) or deactivated (display flashes).
6. In TAPE CAMERA mode:
In TAPE PLAY (VCR) mode:
+ PLAY
TAPE
(VCR)
, FADER, EFFECT and MULTI-S appear.
Fade in- Press the start/stop button.
Fade out- Press the start/stop button.
Fade in- Press the
Fade out- Press the
P
/ /
e
(play) button.
a
D.EFFECTS ON/OFF
MENU SET
(pause) button.
E
69