Digitally Outputting Analog Video And Audio Signals (Analog-Digital Converter) - Canon OPTURA200 MC Instruction Manual

Digitally outputting analog video and audio
signals (Analog-Digital Converter)
E
Connecting the camcorder to your VCR or 8 mm video camera allows
conversion of recorded analog video and audio signals to digital signals in an
instant. The digital signals can be output to the other equipment with a DV
terminal. The camcorder's DV terminal works exclusively as an output
terminal.
• There may be cases where analog-digital conversion cannot be done
properly, depending on the signals output from the connected equipment.
For example: Signals that include the copyright protective signal, or
anomalous signals such as ones that include ghost signals, etc.
• You cannot use your headphones during digital conversion. Even if the
AV/headphone terminal is set to "PHONES" through the menu, it will
automatically be set to "AV", and "PHONES" will disappear from the
display.
• You are recommended to use power from a household power socket with
the power adapter.
• Do not operate with a cassette inserted to the camcorder.
• Turn off the power of all equipment before performing connections.
• Refer also to the instruction manuals of the other equipment connected.
AV IN/OUT
IN/
OUT
Side with arrow
Above illustration shows the connection using a S-video cable. You can also
connect to the VIDEO terminal instead (
96
S-150 S-video Cable
STV-250N Stereo Video Cable
MIC
: Signal flow
OUTPUT
S(S1)-VIDEO
VIDEO
AUDIO
38).
L
R