Installing And Removing Pluggable Transceiver Modules; Installing A Cisco Pluggable Transceiver Module - Cisco C9200L-24T-4X-A Hardware Installation Manual

Installing a Network Module
Figure 23: Network Module Serial Number Location

Installing and Removing Pluggable Transceiver Modules

Installing a Cisco Pluggable Transceiver Module

Before you begin
See the switch release notes on Cisco.com for the list of supported a Cisco pluggable transceiver modules
(SFP, SFP, SFP28 and QSFP+ modules). Use only supported modules on the switch. For the latest information
about the supported modules, refer to the
For information about installing, removing, cabling, and troubleshooting transceiver modules, see the module
documentation that shipped with your device.
Warning Class 1 laser product. Statement 1008
• Do not remove the dust plugs from the transceiver modules or the rubber caps from the fiber-optic cable
• Removing and installing a transceiver module can shorten its useful life. Do not remove and insert any
until you are ready to connect the cable. The plugs and caps protect the module ports and cables from
contamination and ambient light.
module more often than necessary.
Installing and Removing Pluggable Transceiver Modules
Cisco Transceiver Modules Compatibility
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
Information.
37