Cisco C9200L-24T-4X-A Hardware Installation Manual page 16

Power Supply Modules
Caution
Do not operate the switch with one power supply module slot empty. For proper chassis cooling, both power
supply module slots must be populated with either a power supply or a blank module.
The power supply modules are autoranging units that support input voltages between 100 and 240 VAC. The
output voltage range is 12 to 12.5 V for 125W power supply and 54 to 56 V for 600W and 1000W power
supplies.
All the PoE-enabled switches when installed with both the power supplies support full PoE+; 1440W on a
48-port switch and 740W on a 24-port switch.
The partial PoE-enabled switches support only 600W power supply providing a PoE budget of 370W. If the
switch is installed with one power supply, the available POE budget is 370W and 740W, if there are two
power supplies installed.
The following tables show the PoE available and PoE requirements for PoE switch models.
Table 4: Available PoE with AC Power Supply
Models
C9200 Switches
C9200-24P
C9200-48P
C9200-24T
C9200-48T
C9200-24PB
C9200-48PB
C9200-48PL
C9200-24PXG
C9200-48PXG
C9200L Switches
C9200L-24P-4G
Cisco Catalyst 9200 Series Switches Hardware Installation Guide
10
Default Power Supply Available PoE
PWR-C5-600WAC or 370W
PWR-C6-600WAC
PWR-C5-1KWAC or 740W
PWR-C6-1KWAC
PWR-C5-125WAC or -
PWR-C6-125WAC
PWR-C5-125WAC or -
PWR-C6-125WAC
PWR-C5-600WAC or 370W
PWR-C6-600WAC
PWR-C5-1KWAC or 740W
PWR-C6-1KWAC
PWR-C5-600WAC or 370W
PWR-C6-600WAC
PWR-C5-600WAC or 370W
PWR-C6-600WAC
PWR-C5-1KWAC or 740W
PWR-C6-1KWAC
PWR-C5-600WAC 370W
Product Overview
Full PoE with Redundant
Power Supply
740W
1440W
-
-
740W
1440W
740W
740W
1440W
740W