Disassembly Of Rail Base Unit; Disassembly Of Fan Motor Unit - Panasonic MC-CJ913-Y747 Service Manual

Disassembly of Rail Base Unit

4.7.
1. Remove screw and disassemble the Rail Base Unit from
the Motor Case Set.
2. Remove the faston terminals on the Rail Base Unit.
* Apply the included furoyl when replacing the Rail
Base Unit or the Cord Reel Unit. (Refer to the
included instruction sheet for detail)
Fig.16
Fig.17
4.8.

Disassembly of Fan Motor Unit

1. Disassemble the Swivel Cap and remove 3 screws.
2. Remove the tabs (4 positions) of the Motor Case Unit
and Motor Support Cover, and disassemble the Motor
Case Unit and the Motor Support Cover.
3. Disassemble the Noise Suppressor Unit
4. Disassemble the Motor Support Rubber (Rear)
5. Remove 2 screws and disassemble the Motor Support
Front
6. Remove the Motor Support Front AU
7. Remove the faston terminals on the Lead Wire C Unit.
13
Fig.18
Fig.19