5.3.
Disassembly of Cord Reel Unit
Step 1 Pull up the Cord Reel Unit.
Step 2 Remove 2 Connector Wires from Rail Base Unit.
5.4.
Disassembly of Rail Base Unit
Step 1 Remove the Cord Reel Unit from the Rail Base Unit by
insert a slotted screwdriver into the shaft of the Cord Reel Unit
and turning it 90° counter-clockwise.
Step 2 Remove Cord Reel Unit from Rail Base Unit.
To assemble:
-Turn the Cord Reel Unit holding on the plug
-Number of turns for pretension of the Cord is engraved on the
steel at the side of Cord Reel Unit.
Step 1 Assemble in reverse order of the disassembly.
Step 2 Pretension the Cord Reel Unit.
9