Disassembly Of Rail Base Unit; Disassembly Of Motor Assy - Panasonic MC-CJ917-K747 Service Manual

4.7.

Disassembly of Rail Base Unit

1. Remove screw and disassemble the Rail Base Unit from
the Motor Case Set.
2. Remove the faston terminals on the Rail Base Unit.
* Apply the included furoyl when replacing the Rail
Base Unit or the Cord Reel Unit. (Refer to the
included instruction sheet for detail)
Fig.16
Fig.17

Disassembly of Motor Assy

4.8.
1. Disassemble the Swivel Cap and remove 3 screws.
2. Remove the tabs (4 positions) of the Motor Case Unit
and Motor Cover Unit, and disassemble the Motor Case
Unit and the Motor Cover Unit.
3. Disassemble the Noise Suppressor Unit
4. Disassemble the Motor Support Rubber (Rear)
5. Remove 2 screws and disassemble the Motor Support
Front
6. Remove the Motor Support Rubber (Front)
13
Fig.18
Fig.19