Millivolt Wiring - Empire Comfort Systems DVP20MS Installation Instructions And Owner's Manual

For Standing Pilot Ignition Wiring
Appliance Requirements
Do not connect 110-120 vac to the gas control valve or the
appliance will malfunction and the valve will be destroyed.
"ON DEMAND PILOT" System Operation
After seven days of inactivity of the main burner, the pilot will shut off.
Page 38

MILLIVOLT WIRING

WARNING
NOTICE
MILLIVOLT WIRING DIAGRAM
Optional Wall Switch
Position the wall switch in the desired position on a wall. Run a
maximum of 25 feet (7.8m) or less length of 18 A.W.G. minimum
wire and connect it to the stove valve pigtails.
Do not connect the 110-120 vac to the wall switch or the
control valve will be destroyed.
Label all wires prior to disconnection when servicing con-
trol. Wiring errors can cause improper and dangerous op-
eration. Verify proper operation after servicing.
WARNING
WARNING
42603-4-0421