Component Identification; Controls - Graco Pneumatic PD44 Instructions Manual
Patented meter, mix and dispense valve for precise two-component micro-dispensing.
Hide thumbs
Also See for Pneumatic PD44:
- Setup and operation (48 pages) ,
- Operation & maintenance manual (42 pages) ,
- Operations & parts list (42 pages)
Table of Contents
Advertisement
Component Identification
Controls
Emergency Stop
Air Pressure Gauge
80
psi
PUMP AIR PRESSURE
PUMP MODE
SHOT
EXTEND
CONT.
Air Pressure Regulator
Pump Mode Switch
F
. 2
IG
Pump Mode Switch
EXTEND: The air cylinder and PosiDot rods will immedi-
ately extend and remain in the extended position. This is
the position that the valve should be in if idle for an
extended period of time.
SHOT: The PosiDot will complete one full cycle when
the start device is pressed and released. The PosiDot
will cycle continuously when the start device is pressed
and held.
CONTINUOUS: The PosiDot will continually cycle when
CONTINUOUS is selected. The PosiDot will continue to
cycle until the Pump Mode switch is placed in the SHOT
or the EXTEND position.
313904B
Dispense Valve
F
. 3
IG
Component Identification
9
Advertisement
Table of Contents
