Safety Precautions - LG LT303PI Owner's Manual

Day & Night Function
m
This camera can be selected Color or Black &
White. You can set Color in the daytime and Black
& White at night due to the low illumination. (Filter
Conversion type)
DSS (Digital Slow Shutter) function
m
It is possible to highly sensitive surveillance
because of DSS(Digital Slow Shutter) function.
WDR (Wide Dynamic Range) function
m
The camera can be best condition to watch easily
inside or outside in the strong back light.
Power Supply
m
This camera must always be operated a DC 12V
Certified/Listed, class 2 power supply only.

Safety Precautions

Do not attempt to disassemble the camera
m
To prevent electric shock, do not remove screws or
covers. There are no user serviceable parts inside.
Ask a qualified service personnel for servicing.
Avoid the camera with direct sunlight
m
Do not aim the camera at bright objects. Whether
the camera is in use or not, never face it with
direct sunlight or other extremely bright objects.
Otherwise blooming or smear may be caused.
Handle the camera with care
m
Do not abuse the camera. Avoid striking, shaking,
etc. The camera could be damaged by improper
handling or storage.
Do not use strong solvents or detergents
m
Use a dry cloth to the camera when it is dirty. If
it is hard to remove the dirt on the camera, use a
mild detergent and wipe it gently.
Do not install this camera upside down
m
This camera is designed for mounting on the ceil-
ing or wall.If you install this camera upside down,
for example, mounted on the floor, it may cause
malfunction.
Do not use the camera in such places as
m
shown below.
The lens may become cloudy due to condensation
if the camera is used under the following condi-
tions.
Rapid temperature fluctuation by switching an
•
air conditioner on and off.
6
Rapid temperature fluctuation due to frequent
•
door opening and closing.
Use in an environment where eyeglasses
•
become foggy.
Use in a room filled with cigarette smoke or
•
dust.
If the lens becomes cloudy due to condensation,
remove the dome cover and wipe all moist sur-
faces with a soft cloth.
Before operating, please check proper temper-
m
ature, humidity and power source ratings.
Use the camera under conditions where tempera-
ture is between -10~50 °C and humidity is below
80%. The input power source is DC 12V.
Consumables
m
Parts having contacts such as the lens-drive
motors, cooling fan built inside the camera are
subject to wear with time. About replacement and
maintenance of such parts, please ask the nearest
service center.