Table of Contents
Advertisement
11. TECHNICAL SPECIFICATIONS
GENERAL CHARACTERISTICS
Supply Voltage
Input Frequency
Maximum Power consumption
Standby Low Power Consumption
Operating temperature
Storage temperature
Humidity
Physical dimensions
Weight
HARDWARE CONFIGURATION
Main Processor
Flash Memory
DDRRAM
DIGITAL CAPABILITIES
Transmission Standards
DEMODULATION
COFDM
FEC
VIDEO
ALL MPEG-2 MP@ML Video Decoder
Aspect Ratio
RGB analogue outputs.
CVBS analogue output.
AUDIO
MPEG1 Layer 1 and 2
Sampling frequencies supported
Output can be programmed as STEREO, LEFT
only or RIGHT only (on both outputs). This is
useful for dual mono channels in order to select
the correct sound track, which is stored for every
channel.
Wide dynamic range
220 - 240V AC, 50Hz
470 Mhz-862 Mhz
21 W
Less than 3 W
5ºC to +40ºC
-15ºC to +55ºC
25 to 75 % rel
360x283x56 mm
2,8 kg
STM5100
4 Mbyte
64 Mbyte
DVB, MPEG2
with 2K/8K FFT mode.
for all DVB Modes.(Automatically found)
4:3, 16:9 with pan vector
BW ≥ 5MHz at 0.5 to 5 MHz sweep signal
32 kHz, 44.1 kHz or 48 kHz.
16-bit resolution
36
Advertisement
Table of Contents
