Selection Screen - oticon More Pocket Manual

Oticon More, Opn S™, Opn™
Quick Fitting Guide
Opening Screen
In order to navigate through the Genie 2 software, follow the tabs at the top of
the screen, working from left to right.
Welcome Screen
From the welcome screen, either connect to instruments or simulate a fitting.

Selection Screen

Once connected, the bars beside the hearing aids become green. The ability to
change the speaker strength is located in the middle of the page.
10
Selection Screen — Acoustics
Clicking on the vertical menu item labeled "Acoustics" allows for the opportunity
to change the selected earpiece. Please note the new OpenBass dome will be
an option with Oticon More miniRITE R. If an earpiece is changed, be sure to
re‑prescribe settings at the bottom of the screen.
Fitting Screen
The order of fitting tools visible on the left task pane have changed to make
key fitting features easily accessible and convenient. The Fitting Screen
includes access to gain adjustments, adaptation management and viewing
compression ratios. If unstable gain is present, an unstable gain indicator will
appear next to the battery and green connection bars at the top of the screen.
By clicking on this unstable gain indicator, the software will give suggestions
to prevent feedback.
11