oticon miniRITE R Instructions For Use Manual
Hide thumbs
Also See for miniRITE R:
- Instructions for use manual (106 pages) ,
- Instructions for use manual (40 pages) ,
- Instructions for use manual (40 pages)
Related Manuals for oticon miniRITE R
Summary of Contents for oticon miniRITE R
- Page 1 Instructions for use Charger 1.0 miniRITE R miniBTE R Oticon Real™ Oticon More™ Oticon Zircon Oticon Play PX Oticon Opn S™ Oticon Opn Play™ Oticon Ruby Oticon CROS PX...
- Page 2 Introduction to this booklet This booklet guides you on how to use and maintain your new charger. Ensure you read this booklet carefully, including the Warnings section. This will help you get the most benefit from your charger. If you have additional questions about the use of your charger, contact your hearing care professional.
- Page 3 Intended use Intended use The charger is intended to recharge the hearing aids and CROS transmitter that contain rechargeable batteries. The product is intended to be used together with the given hearing solution. Indications for use There are no indications for use (diagnoses) for the charger itself.
-
Page 4: Table Of Contents
Table of contents About Package contents Charger Temperature conditions Getting started Prepare charger Charge the hearing aids Charging time Daily use Power the charger using other sources Caring for your charger Warnings General warnings More info Troubleshooting Conditions of use Compliance statements Warranty... -
Page 5: Package Contents
The packaging box consists of the following elements: Charger Power plug (varies from country to country) Instructions for use Charger 1.0 miniRITE R miniBTE R Oticon Real™ Oticon More™ Oticon Zircon Oticon Play PX Oticon Opn S™ Oticon Opn Play™... -
Page 6: Charger
Charger What it is and does USB cable Insert in power plug or Charging ports other power sources For hearing aids when charging Power plug LED light For power socket Status indicator for Power cable charger ON/OFF Supply power About Getting started Daily use Warnings More info... -
Page 7: Temperature Conditions
Temperature conditions Temperature Charging condition Below +5°C No charging due to low temperature (+41°F) +10°C to +35°C Best charging condition. Charging takes up to 3.5 hours. (+50°F to +95°F) +5°C to +10°C and Extended charging. Charging takes up to 5 hours. +35°C to +38°C (+41°F to 50°F and +95°F to +100°F) -
Page 8: Prepare Charger
Prepare charger Connect to power source Charger is turned ON 1. Insert the USB plug into the power When the charger is connected to plug. power, the GREEN LED turns ON. 2. Insert the power plug into a power socket. The charger turns ON automatically. -
Page 9: Charge The Hearing Aids
Charge the hearing aids Place hearing aids in charger Charging Place the hearing aids in the The hearing aid LED lights turn ON charging ports as shown in the when the hearing aids are correctly picture. Make sure that the hearing placed in the charger. -
Page 10: Charging Time
Charging time Ensure you fully charge your hearing aid before first time use. Charge your hearing aid every night. That ensures you start your day with fully charged hearing aid. Be aware that charging time may vary depending on the remaining capacity of the battery and between the left / right side hearing aid. - Page 11 If your hearing aid’s battery is completely drained the normal charging time is: miniRITE R Fully charged 50% charged 25% charged 3 hours 1 hour 0.5 hours miniBTE R Fully charged 40% charged 20% charged 3.5 hours 1 hour 0.5 hours When the battery is fully charged, the charging process stops automatically.
-
Page 12: Power The Charger Using Other Sources
Power the charger using other sources You can power the charger from other sources than a power socket. This can be done by using the charger’s USB cable. Ensure that the power source is USB 2.0 compliant, with a minimum of 500mA output. -
Page 13: Caring For Your Charger
Caring for your charger Always ensure that the charger is dry and clean before use. Keep the charging ports clean from dust by using a dry cloth. Do not use water or cleaning fluids to clean the charging ports. Store your charger in a dry location, e.g. in the bedroom. Ensure you keep the charger in an environment with a temperature between +5°C and +38°C (+41°F and +100°F). -
Page 14: Warnings
General warnings For your personal safety and to ensure Choking hazards and risk of swallowing correct usage, you should familiarize small parts yourself fully with the following general Charger, hearing aids and their parts warnings before using your charger. should be kept out of reach of children and Consult your hearing care professional if anyone who might swallow these items or you experience unexpected operations or... - Page 15 Connection to external equipment The safety of the charger, when connected to external equipment with USB cable, is determined by the external signal source. When the charger is connected to external equipment which is plugged into a power socket, this equipment must comply with IEC 62368-1 or equivalent safety standards.
-
Page 16: Troubleshooting
Troubleshooting Symptom Possible causes The charger LED remains turned OFF when the The charger is not turned ON charger is connected to power The charger LED shows The hearing aid or charger’s temperature is too warm long ORANGE blinks The charger’s temperature is too cold The charger LED repeatedly shows three short ORANGE blinks... - Page 17 Solutions Verify that the power plug is correctly connected Ensure that charging has started, to make sure the power source delivers sufficient output for your charger Move the charger and hearing aid to a location with a temperature between +5°C and +38°C (+41°F and +100°F) Move the charger to a location with a temperature between +5°C and +38°C (+41°F and +100°F) Contact your hearing care professional...
- Page 18 Troubleshooting Symptom Possible causes The hearing aid LED blinks GREEN when Hearing aid has not been in use for an extended period of time hearing aid is placed in the charger The charger is not turned ON The hearing aid or charger’s temperature is either too warm or The hearing aid LED too cold remains turned OFF...
- Page 19 Solutions Depending on how depleted the battery in the hearing aid is, the hearing aid automatically resumes normal charging mode after a timeframe of up to 10 minutes Ensure you leave the hearing aid in the charger during this process Verify that the charger power plug is correctly connected Move the charger and hearing aid to a location with a temperature between +5°C and +38°C (+41°F and +100°F) Reinsert the hearing aid into the charger.
-
Page 20: Conditions Of Use
Conditions of use Operating conditions Temperature: +5°C to +38°C (+41°F to +100°F) Humidity: 5% to 93%, non-condensing Atmospheric pressure: 700 hPa to 1060 hPa Transportation and Temperature and humidity shall not exceed the below storage conditions limits for extended periods during transportation and storage: Temperature: -25°C to +70°C (-13°F to +158°F) Humidity: 5% to 93%, non-condensing... -
Page 21: Compliance Statements
Compliance statements This device complies with part 18 Use of other accessories not verified of the FCC Rules. by the manufacturer may not ensure compliance with FCC RF exposure Radiofrequency radiation guidelines. exposure information This device complies with FCC RF User information radiation exposure limits set forth This device has been tested and found... - Page 22 However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to other electronic equipment, which can be determined by turning the device OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: •...
- Page 23 This medical device complies with Declaration of Conformity is available the Medical Device Regulation (EU) from the headquarters: 2017/745. Oticon A/S Kongebakken 9 DK-2765 Smørum Denmark www.oticon.global/doc SBO Hearing A/S Waste from electronic equipment must be handled according to Denmark...
- Page 24 Description of symbols and abbreviations used in this booklet Warnings Text marked with a warning symbol must be read before using the device. Manufacturer The device is produced by the manufacturer whose name and address are stated next to the symbol. Indicates the medical device manufacturer, as defined in EU Regulations 2017/745.
- Page 25 Description of additional symbols used on labels Keep dry Indicates a medical device that needs to be protected from moisture. Catalog number Indicates the manufacturer’s catalog number so that the medical device can be identified. Serial number Indicates the manufacturer’s serial number so that a specific medical device can be identified.
- Page 26 International warranty Your device is covered by an you have bought your device. Your international warranty issued by the hearing care professional may also have manufacturer. This international issued a warranty that goes beyond the warranty covers manufacturing clauses of this international warranty. and material defects in the device Please consult him/her for further itself, but not in accessories such as...
-
Page 27: Warranty
Warranty Certificate Name of owner: _______________________________________________________ Hearing care professional: _______________________________________________ Hearing care professional’s address: _______________________________________ Hearing care professional’s phone: ________________________________________ Purchase date: ________________________________________________________ Warranty period: _______________ Month: ________________________________ Model: _______________________ Serial no.: ______________________________... - Page 28 0000262105000001...