Tv Adapter Overview - oticon More Pocket Manual

TV Adapter Overview

Power indicator TV indicator
SelectMe Power RCAL+R TOSLINK In and Out
Mode
Power on, not paired to any hearing aids
Pairing complete (steady light 30 secs)
Power on, not streaming
RCA inserted and streaming
TOSLINK inserted and streaming (digital)
TOSLINK inserted and streaming (invalid signal)*
Fault condition *
No light Blinking
* Try other input connection
** Contact your hearing care professional
62
Included
• Instructions for use
• Power supply
• TV Adapter ‑ black
• TOSLINK optical cable 6.5 feet (2m)
• SCART to RCA stereo cable
• Minijack 3.5mm to RCA converter
Power indicator TV indicator
Fading Steady
Using TV Adapter 3.0
Step 1: Connect the TV Adapter 3.0 box to your television
See the Instructions for Use booklet that comes with the TV adapter.
Four methods are available to support a wide variety of connection needs.
Step 2: Pair your hearing aids with the TV Adapter
Before using the TV adapter, it must be paired with your
hearing aids.
Pairing is only required once and takes around
20‑60 seconds.
1. Make sure the TV adapter is on (plugged in).
2. Open and close the battery door on (both of)
your hearing aid(s).
3. Place both hearing aids close to, or on top of,
the TV Adapter.
4. Pairing is completed when the Power Indicator and TV
Indicator lights turn steady blue for about 30 seconds.
5. Your hearing aids are now able to receive sound
streaming from the TV adapter.
Step 3: Start TV sound using your hearing aids
To listen to TV, simply make long
presses on the button on your
hearing aids to cycle through the
programs until you reach the TV
listening program. The program
cycle will depend on how many
programs have already been set
up in your hearing aids by your
hearing care professional.
To stop the sound from the TV,
simply cycle back to the desired
program in your hearing aids.
Step 4: Alternatively, you can also start
TV sound and adjust volume with
the optional hearing aid Remote
Control 3.0 accessory.
Note: The optional Oticon ON app also lets you access
the TV listening program and adjust volume control.
P1 P2 TV
Change program
A short press on the RIGHT hearing aid
button increases ‑the volume.
A short press on the LEFT hearing
aid button decreases the volume.
P1 P2 TV
Change program
Adjust the volume
by pressing up
or down briefly.
Repeat the brief
press for further
adjustments.
63