Us English - FLIR TG267 Quick Start Manual

Figure 4 Laser Safety Label
Figure 5 Type-K Thermocouple
EN-US English
QUICK STEPS
1. Register to activate the 2–10 year warranty extension (see Fig-
ure 3, QR Code, in the Illustrations section).
2. Long press the Power button to switch ON or OFF.
3. Scan a test area using the default MSX® image mode (thermal
plus visible image).
4. Use cross-hairs and laser for targeting. The laser's circular tar-
get identifies test spots. See temperature reading on the display.
5. To use visible image mode only, see Image Adjustments menu.
6. Slide the high temperature lever (TG297) to the right to measure
> 400℃ (752℉).
7. Pull the trigger to capture images.
CAMERA PARTS
See Figure 1, Camera Parts, in the Illustrations section.
1. Display area
2. Return button (back up in the menu system)
3. Laser pointer button
4. Up/Down & Power (long press)/Menu (short press) buttons
5. Lanyard post
6. Accessory mount
7. High temperature lever (TG297) for use > 400℃ (752℉)
8. Lepton® IR camera
9. Laser pointer
10. USB-C and Type-K (TG267) jack compartment
11. Spot thermal sensor
12. Flashlight (LED)
13. 2M pixel visible spectrum digital camera
14. Image capture and menu exit trigger
#NAS100021; r. AD/64725/64725; mul
2