fantastic furniture Hamilton Side Table Square Manual page 6

Step 3
You will need
2 x Dowels 4 x Cam Nuts
(H1) (H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 2 x Dowels (H1) into Side Panel (P2). Insert 4 x
Cam Nuts (H4) into Shelf Panel & Rails (P3&P4x4). Rotate the nuts so the arrows point towards
the incoming bolts. Attach Shelf Panel & Rails (P3&P4x4) to Side Panel (P2) by tightening all nuts
with the Phillips Head Screwdriver.
Step 4
You will need
2 x Dowels 4 x Cam Nuts
(H1) (H4)
Phillips Head
Screwdriver
Insert 2 x Dowels (H1) into Shelf
Panel (P3). Insert 4 x Cam Nuts
(H4) into Shelf Panel & Rails
(P3&P4x4). Rotate the nuts so
the arrows point towards the
incoming bolts. Attach Side Panel
(P2) to Shelf Panel & Rails (P3&P4x4)
by tightening all nuts with the Phillips
Head Screwdriver.
fantasticfurniture.com.au fantasticfurniture.com.au
(P4)
(P2)
(P2)
(P4)
(P4)
(P3)
(P4)
(P4)
(P3)
(P4)
(P4)
(P4)
Page 6