V-ZUG Unimatic TL WP Operating Instructions Manual page 47

... appears
Possible cause
• Mesh filter in base
missing.
... illuminates
Possible cause
• Pressing a programme
selection button several
times while the childproof
lock is activated.
Solution
Insert mesh filter in base.
➤
Cancel the error message by pressing the
➤
button.
Start the programme.
➤
If the error appears again, note down the
➤
error message in full and the serial number
(FN) and then turn off the power supply.
Inform the caretaker, the owner of the
➤
appliance or the property management
company.
Solution
Hold the required programme selection
➤
button depressed and at the same time
press the
has been overridden. The appliance can
now be operated without further regard to
the childproof lock until the programme
starts.
7 Trouble-shooting
button. The childproof lock
47