System Requirements; Minimum Required Os Version; Osecomm32 Host Application; Neto32 Host Application - Opticon RFI3793B Manual

Batch demo application
Table of Contents

Advertisement

2 System Requirements

2.1 Minimum required OS version

This demo application requires the OS version:
OPN2004:
OPN2005:
OPN2006:
PX20:
To check the currently installed OS version, use Appload (Select: 'Utilities' > 'Show software version').
To check the currently installed application version as well as the OS version, scan the 'Z1' menu label while in USB-
VCP mode. (See Universal Menu Book, Chapter 7.) Note that you will need to have an open serial terminal
connected to the COM/serial port allocated by your host PC's OS to see the reported versions; this can be done with
Appload's RS232 Monitor.

2.2 OseComm32 host application

This demo application can use Opticon's OseComm32 application to transfer files from the barcode readers to a local
PC or laptop. This application can be downloaded from our web site. The minimum required OseComm32 version is
Version 1.0.4.0.

2.3 NetO32 host application

This demo application can use Opticon's legacy file-transfer protocol, NetO, by use of the NetO32 Windows
application. This application can be downloaded from our website. Note that continued development for NetO32
has ceased in favor of OseComm, but it is still supported by this demo application. Use the NetO configuration label
in Appendix A to switch to the NetO protocol and see chapter 9.2 for more information.

2.4 Appload

To be able to install this demo application firmware onto your barcode reader, you'll need to have Appload installed
on your PC. Make sure you have the latest version of Appload, which can be found on our web site.
Please read the 'Loading of software' section of this manual before downloading any software on your barcode
reader.

2.5 Software updates

In the future more features and bug fixes are likely to be implemented into the OS and this application. To find out if
there are software updates available, please check our web site.
All available software and documentation for the barcode readers can be found at
following sections:
'Service and support' > 'Software' / 'Manuals' > 'OPN2004 / OPN2005 / OPN2006 / PX20'
RBIV0032 (or higher)
RBLV0032 (or higher)
RBNV0032 (or higher)
RBMV0032 (or higher)
www.opticon.com
in the
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rfm3793bOpn2004Opn2005Opn2006Px20

Table of Contents