System Requirements; Software Updates - Opticon OPN2003 User Manual

2 System Requirements

2.1 Minimum required OS version
For USB-VCP and CRD2000 support, this demo application requires OS version:
OPN2002: RBGV0212 (or higher)
OPN2003: RBFV0212 (or higher)
For USB-MSD (Mass Storage Device) support, this demo application requires the OS
version:
OPN2002: RBGV0220d (or higher)
OPN2003: RBFV0220d (or higher)
To check the currently installed OS version it's possible to use Appload (Select: 'Utilities' >
'Show software version').
To check the currently installed application version it is also possible to transmit both the
OS and application version by USB-VCP by reading the 'Z1' menu label. (See Universal
menu book chapter 7).
2.2 Minimum required NetO32 host application
This demo application can use Opticons NetO32 application to be able to transfer files
from the OPN2002 or OPN2003 to a remote PC or laptop. This application can be
downloaded from our web site. The minimum required NetO32 version is Version 2.07.
2.3 Appload
To be able to install this application onto your OPN2002 you'll need to have Appload
installed on your PC. Make sure you have the latest version of Appload, which can be
found on our web site.
Please read the 'Loading of software' section of this manual before downloading any
software on the OPN2002/3.

2.4 Software updates

In the future more features and bug fixes are likely to be implemented into the OS and this
application. To find out if there are software updates available, please check our web site.
All available software and documentation for the OPN2002/3 can be found at
www.opticon.com
'Service and support' > 'Software' / 'Manuals' > 'OPN2002/3'
in the following section:
2