Neto32 - Opticon RFI3793B Manual

In the Receive Files(s) Dialog the task can be configured as shown in the following image.
Finally, select 'Options' > 'Start Protocol'.
More information about additional OseComm32 features can be found in the help file of OseComm32.

9.2 Neto32

When the USB-VCP interface has been selected (see chapter 3.1) and the NetO protocol (see Appendix A), then the
barcode database file can be transmitted to a remote PC or laptop using NetO32. The data is transmitted by the USB
cable (USB-VCP). To be able to receive the files on the host, you'll need NetO32 to be installed. The latest version of
NetO32 can be downloaded from our web site under 'Service and support' > 'Software' > 'Neto32'. More information
about additional Neto32 features that aren't described in this manual can be found the help file of NetO32.
Screenshot of the main window of NetO32
11